Ford Focus Head Unit Upgrade Guide | TEYES CC4 Pro

Before choosing a Ford Focus head unit upgrade, identify the generation and compare the full centre stack with the kit photos. The catalogue ranges overlap around model changes. Use the build month, steering side and original dash layout to choose the fascia.

Focus Mk1, 1998–2005

The Mk1 listing has left- and right-hand-drive options. Match your driving side and the original radio and control surround before choosing the variant.

TEYES CC4 Pro kit for Ford Focus Mk1 1998–2005. Select the photo to view the kit.

Focus Mk2, 2004–2011

The Mk2 listing offers F1 and F2 frames. Compare the radio opening and surrounding trim with the photos and confirm the configuration before ordering.

TEYES CC4 Pro kit for Ford Focus Mk2 2004–2011. Select the photo to view the kit.

Use this TEYES walkthrough to recognise the Mk2 dashboard and trim layout.

Watch TEYES Ford Focus Mk2 dashboard walkthrough on YouTube

Focus Mk3, 2011–2019

The Mk3 listing shows a factory reverse-camera connection using a supplied 12-pin plug. Check the original connector and camera configuration before ordering. If your vehicle has a different setup, ask about retention or a compatible replacement camera. Compare the fascia against the entire dash and ask TEYES for the exact adjustment procedure if the trim covers part of the display.

TEYES CC4 Pro kit for Ford Focus Mk3 2011–2019. Select the photo to view the kit.

This TEYES Australia video shows the Mk3 dashboard with an earlier CC3. Use the CC4 Pro wiring instructions for your kit.

Watch TEYES Ford Focus Mk3 dashboard walkthrough on YouTube

Before refitting the trim

With the car safely parked, test audio, steering wheel controls, hazard switch access and the reverse picture. If your Focus is a later generation, send the build month and dashboard photo for a separate fitment check.

Ask TEYES to check your Focus fitment · Factory feature retention checklist · Find a TEYES installer