Mazda BT-50 Head Unit Upgrade Guide | TEYES CC4 Pro

The TEYES CC4 Pro listing below covers the pictured second-generation Mazda BT-50 dashboard, listed as 2011–2020. If your ute is from a changeover year, check the build month and original dash before ordering. Earlier and later BT-50 dashboards need separate fitment checks.

TEYES CC4 Pro F1 kit for Mazda BT-50 2011–2020. Select the photo to view the kit.

Check behind the original radio

The product page shows a rear connector layout that does not match the supplied plug-and-play harness. If yours looks like that example, contact TEYES or an installer to confirm the wiring plan. If the vehicle already has an aftermarket stereo, photograph the original plugs as well as any existing adaptor.

Keep the hazard and central-locking switch connected

The fitment notes say that leaving this switch disconnected can stop the steering wheel controls from working. Check the switch connection and test volume, track and phone buttons before closing the dash. If your supplied configuration uses CANbus, use the profile confirmed for that harness.

Watch General TEYES CC4 CANbus setup reference on YouTube

Plan the rear camera around the ute setup

Tell us if you use the original tub camera, a tray or canopy camera, or a separate trailer system. Confirm the video connection and reverse trigger independently. Share a photo of any UHF mount, brake controller or switches beside the radio to check screen and control clearance before fitting.

Ask TEYES to check your BT-50 fitment · Factory feature retention checklist · Find a TEYES installer