Nissan Patrol Y62 Head Unit Upgrade Guide | TEYES CC4 Pro

by TEYES Australia

When choosing a Nissan Patrol Y62 head unit upgrade, start with the full centre stack and the factory equipment fitted to your vehicle. Two Patrols with similar dashboards can have different audio and camera systems. Match the trim, connectors and retention features before choosing the screen.

Compare the two Y62 CC4 Pro listings

The first kit is listed for the 2010–2019 Y62 dashboard. Its fitment notes list Bose and factory 360° support. Confirm the harness for your build and check which original camera views and controls carry over.

TEYES CC4 Pro for Nissan Patrol Y62 2010–2019
TEYES CC4 Pro for Nissan Patrol Y62 2010–2019. Select the photo to view the kit.

The separate 9-inch listing covers the pictured 2010–2020 dashboard. The ranges overlap, so compare both fascia photos and confirm which setup matches your Patrol. For a later Y62 or a different factory display, ask TEYES for a separate match.

TEYES CC4 Pro 9-inch kit for Nissan Patrol Y62 2010–2020
TEYES CC4 Pro 9-inch kit for Nissan Patrol Y62 2010–2020. Select the photo to view the kit.

What to confirm for Bose and factory 360°

  • Bose audio. Include a photo of the Bose badge if fitted. Ask which harness retains the amplifier and verify all speakers after installation.
  • Around-view cameras. Tell us whether the factory screen shows a rear view only or a stitched surround view. List the original camera modes you want to keep, including any view you normally call up with a dashboard button.
  • Climate and steering controls. Show which controls are physical and which functions appear on the original screen. List steering wheel buttons, parking alerts and vehicle menus you use.

If you’re adding a TEYES digital 360° system, choose the camera package with your installer. The kit uses all four digital camera inputs. Factory surround-view retention is a separate fitment check.

TEYES setup reference for factory amplified vehicles

This TEYES Australia video covers general CC4 Pro amplifier setup. Use the Patrol-specific harness and settings confirmed for your kit.

Watch TEYES factory amplifier setup on YouTube

Before ordering

Send the build month, trim and a straight-on photo of the entire centre stack. Include photos of the camera screen and original radio connectors if available. With the vehicle safely parked, test audio, camera views, climate and steering functions before clipping the trim back in.

Ask TEYES to check your Patrol fitment · Read the factory feature retention checklist · Find a TEYES installer

Back to T'EYES Info Blogs