Subaru Outback Head Unit Upgrade Guide | TEYES CC4 Pro

by TEYES Australia November 10, 2026

Start a Subaru Outback head unit upgrade by comparing the radio and climate panel together. TEYES lists CC4 Pro kits for three Outback generations. The catalogue ranges overlap at 2009 and 2014, so use the build month, driving side and original dashboard to choose the fascia.

Outback 3 and Legacy 4, 2003–2009

Compare the shape of the radio and its relationship to the climate controls. Photograph the complete centre stack and identify any premium audio before choosing a harness.

TEYES CC4 Pro kit for Subaru Outback 3 and Legacy 4 2003–2009. Select the photo to view the kit.

The TEYES Australia video shows this generation with an earlier head unit. Use it to recognise the dashboard layout.

Watch TEYES Subaru Outback 3 and Legacy 4 walkthrough on YouTube

Outback 4 BR and Legacy 5, 2009–2014 right-hand drive

Choose the right-hand-drive listing for the matching dashboard. If the original radio has navigation or a factory camera, photograph the radio and its rear connectors. Ask TEYES to verify camera and AM/FM antenna retention for that exact radio.

TEYES CC4 Pro kit for Subaru Outback 4 BR and Legacy 5 right-hand drive. Select the photo to view the kit.

This TEYES Australia walkthrough covers the 2009–2014 generation. Screen menus differ on the CC4 Pro.

Watch TEYES Subaru Outback 4 and Legacy 5 walkthrough on YouTube

Outback 5, 2014–2018

Match the fifth-generation dash to the product photos. If yours has a Harman Kardon badge, include that in the fitment check so TEYES can verify the amplifier connection. Ask separately about the factory camera, steering wheel buttons and USB port. For a later Outback, confirm the exact dashboard before ordering.

TEYES CC4 Pro kit for Subaru Outback 5 2014–2018. Select the photo to view the kit.

Check the original functions before refitting the dash

With the car safely stationary, test the reverse image, steering wheel volume and phone buttons, FM reception, USB data and audio through the factory speakers. If the reverse screen opens but shows no picture, check the camera signal and adapter separately from the reverse trigger.

Ask TEYES to check your Outback fitment · Read the factory feature retention checklist · Find a TEYES installer