Toyota HiAce Head Unit Upgrade Guide | TEYES CC4 Pro

Choose a Toyota HiAce head unit upgrade by matching the centre dashboard, driving side and original radio. TEYES lists two H200 CC4 Pro options with overlapping years. If your van is from a changeover year, confirm the chassis and dashboard before choosing a fascia.

HiAce H200 2010–2018, right-hand drive

Compare the shape of the factory surround, vent position, hazard switch and climate panel to this right-hand-drive listing. A straight-on photograph of the entire centre stack makes it easier to check the fascia and the available space around the screen.

TEYES CC4 Pro kit for Toyota HiAce H200 2010–2018 right-hand drive. Select the photo to view the kit.

HiAce XH10 / H200 5, listed 2004–2021

Use this separate listing for the dashboard shown in its photos. Its broader year range overlaps the other H200 kit. If you have the H300 or your dash differs from both examples, ask TEYES to match it separately.

TEYES CC4 Pro kit for the listed Toyota HiAce XH10 and H200 dashboard. Select the photo to view the kit.

Check the reverse camera, USB and wheel controls

Tell us whether the reverse picture appears in the factory radio, a mirror display or a separate monitor. If you want to move that picture to the head unit, confirm the signal, adaptor and reverse trigger. Check whether the original USB port can carry phone data. For camper or work vans, include any existing camera wiring or equipment beside the radio.

TEYES rear-camera setup reference

This general CC4 Pro video shows where to select a rear-camera format. Match the setting to the camera and harness in your HiAce.

Watch General TEYES CC4 Pro rear-camera format setup on YouTube

Ask TEYES to check your HiAce fitment · Factory feature retention checklist · Find a TEYES installer