Toyota Prado 2017–2023 Wide Screen head unit upgrade guide | TEYES CC4 Pro

by TEYES Australia November 5, 2026

Measure the space between the vents and check the sightline from the driver’s seat. Ask for the outer dimensions of the display and check switch clearance. For vehicles outside 2018–2020, confirm fitment separately.

Kit covered in this guide
TEYES CC4 Pro for Prado 150 2018–2020

Will a wider screen clear the Prado vents?

Start from the driver’s normal seating position. Measure the available width between the vents, then the height above the climate controls. Ask for the outer fascia dimensions and mark that outline on a sheet of paper. Hold it against the parked dashboard to check your view of the controls and access to the hazard switch. A screen diagonal alone cannot tell you where its edges will sit.

Prado screen opening and the physical controls beside it. Use these landmarks when measuring clearance.

Separate the screen-size decision from the wiring decision

The linked Prado configuration lists a 10-inch display for 2018–2020. If you are shopping for a different display width, send the target dimensions and a dashboard photo before ordering. Compare the factory radio face in the reference image and mention any original 360° camera. A 2017 or 2021–2023 vehicle requires a separate fitment check.

Watch the dashboard walkthrough

Prado 150 dashboard reference, 2017–2021 · TEYES Australia

The CC4 Pro kit

TEYES CC4 Pro product photo for Prado 150 2018–2020.

Compare the kit photos and select your configuration. For a fitment check, include your build month, trim level, factory audio system and a straight-on dashboard photo.