Blaupunkt Aftermarket Radio Pinouts

Match the model and connector orientation to your radio. Verify the battery, accessory and ground circuits before applying power.

Current pinouts

Blaupunkt BP3092

Block III · power and controls

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A1 Illumination +
A2 Telephone mute
A3 No connection
A4 Permanent battery +12 V
A5 Automatic antenna control
A6 Illumination −
A7 Switched ignition +12 V
A8 Ground

Block II · speaker outputs and MAUS-Bus

B1B9B3B5B10B7B2B4B6B8
Radio socket viewed from the rear
Cavity Circuit
B1 Right rear speaker +
B2 Right rear speaker −
B3 Right front speaker +
B4 Right front speaker −
B5 Left front speaker +
B6 Left front speaker −
B7 Left rear speaker +
B8 Left rear speaker −
B9 MAUS-Bus data out
B10 MAUS-Bus data in

Block I · pre-outs, remote and CD changer

C1C4C7C10C13C16C19C3C6C9C12C15C18C2C5C8C11C14C17C20
Radio socket viewed from the rear · block C
Cavity Circuit
C1 Rear left line output
C2 Rear right line output
C3 Line output ground
C4 Front left line output
C5 Front right line output
C6 Switched remote supply (14 V)
C7 No connection
C8 No connection
C9 No connection
C10 Switched remote supply (14 V)
C11 Remote control
C12 Remote ground
C13 Changer data input
C14 Changer data output
C15 Permanent changer supply
C16 Switched changer supply
C17 Changer ground
C18 Changer audio ground
C19 Changer left audio
C20 Changer right audio
Blaupunkt Fun Line 2

Power and controls

Shown on Casablanca CD50. The accessory blocks are separate.

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A1 Unlabelled in model drawing
A2 Mute input
A3 Unlabelled in model drawing
A4 Permanent battery +12 V
A5 Powered antenna or switched control
A6 Illumination input
A7 Switched accessory +12 V
A8 Ground

Speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B1 Right rear speaker +
B2 Right rear speaker −
B3 Right front speaker +
B4 Right front speaker −
B5 Left front speaker +
B6 Left front speaker −
B7 Left rear speaker +
B8 Left rear speaker −
Blaupunkt Travelpilot RNS149

ISO A · power and control

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A1 Speed signal where fitted
A2 Telephone mute where fitted
A3 Reverse input where fitted
A4 Permanent battery +12 V
A5 Antenna control output
A6 Illumination input
A7 Switched accessory +12 V
A8 Ground

ISO B · speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B1 Right rear speaker +
B2 Right rear speaker −
B3 Right front speaker +
B4 Right front speaker −
B5 Left front speaker +
B6 Left front speaker −
B7 Left rear speaker +
B8 Left rear speaker −

Mini-ISO C · line, control and changer

C1C4C7C10C13C16C19C3C6C9C12C15C18C2C5C8C11C14C17C20
Radio socket viewed from the rear · block C
Cavity Circuit
C1 Rear left line output
C2 Rear right line output
C3 Line output ground
C4 Unconnected
C5 Unconnected
C6 Switched accessory output
C7 Unconnected
C8 Unconnected
C9 Unconnected
C10 Switched accessory output
C11 Remote input
C12 Remote ground
C13 Changer data input
C14 Changer data output
C15 Changer permanent +12 V
C16 Changer switched supply
C17 Changer data ground
C18 Changer audio ground
C19 Changer left audio
C20 Changer right audio

D · wheel sensor

D9D10D7D8D5D6D3D4D1D2
Radio socket viewed from the rear · block D
Cavity Circuit
D1 Ground
D2 —
D3 —
D4 —
D5 —
D6 —
D7 Wheel sensor
D8 —
D9 Wheel sensor
D10 —

Legacy pinouts

Blaupunkt Alpha CC

ISO A · power and control

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A2 Mute
A4 S-K (source label)
A5 Antenna control
A6 Illumination
A7 Switched supply
A8 Ground

ISO B · speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B3 Right front +
B4 Right front −
B5 Left front +
B6 Left front −
Blaupunkt BP9980

Power block · fuse at left

The source prints the chassis connector with its fuse at left. The two lighting symbols differ in the source. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4B1B2B3B4
Connector face in the reference orientation
Position Circuit shown on reference
A1 GND
A2 ILL
A3 BATT
B1 ILL-SW
B2 ANT

Speaker block · fuse at left

The chassis is shown in the same orientation as the power block. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3A4B1B2B3B4
Connector face in the reference orientation
Position Circuit shown on reference
A1 LR−
A2 LF−
A3 RF−
A4 RR−
B1 LR+
B2 LF+
B3 RF+
B4 RR+
Blaupunkt Car 300 (D)

ISO A · power and control

The model diagram shows a separate communications block.

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A1 Telephone mute
A4 Terminal 15 · switched ignition
A5 Antenna control
A6 Illumination
A7 Terminal 30 · permanent battery
A8 Ground

ISO B · speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B1 Right rear +
B2 Right rear −
B3 Right front +
B4 Right front −
B5 Left front +
B6 Left front −
B7 Left rear +
B8 Left rear −
Blaupunkt Casablanca MP56

ISO A · power and control

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A1 No connection
A2 Radio mute
A3 Subwoofer output
A4 Permanent battery +12 V
A5 Antenna control
A6 Illumination
A7 Switched ignition +12 V
A8 Ground

ISO B · speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B1 Right rear +
B2 Right rear −
B3 Right front +
B4 Right front −
B5 Left front +
B6 Left front −
B7 Left rear +
B8 Left rear −

Mini-ISO C · line, control and changer

C1C4C7C10C13C16C19C3C6C9C12C15C18C2C5C8C11C14C17C20
Radio socket viewed from the rear · block C
Cavity Circuit
C1 Rear left line output
C2 Rear right line output
C3 Line output ground
C4 Front left line output
C5 Front right line output
C6 Switched amplifier supply
C7 Telephone AF input +
C8 Telephone AF input −
C9 Radio mute
C10 Remote supply +12 V
C11 Remote control
C12 Remote ground
C13 Changer data input
C14 Changer data output
C15 Permanent supply
C16 Switched changer supply
C17 Bus ground
C18 Line input ground
C19 Changer left audio
C20 Changer right audio

Block D · AUX and microphone

D9D10D7D8D5D6D3D4D1D2
Radio socket viewed from the rear · block D
Cavity Circuit
D1 AUX 2 left input
D2 AUX 2 right input
D3 AUX 2 ground
D4 No connection
D5 No connection
D6 No connection
D7 No connection
D8 No connection
D9 Microphone ground
D10 Microphone input
Blaupunkt CCP08, Denver SQR88, Sylt SQR88

Main connector

Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2B1B2B3C1C2C3D1D2D3E1E2E3
Connector face in the reference orientation
Position Circuit shown on reference
A1 CTRL+5
A2 CTRL
B2 LINE-R
B3 LINE-L
C3 LINE-GND
D1 REM
D2 BATT
E1 ACC
E3 GND
Blaupunkt ESSEN CR-31 (BP1771)

Power connector

The chassis photo labels power separately from the speaker outputs. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2B1B2B3B4
Connector face in the reference orientation
Position Circuit shown on reference
A1 ANT
A2 BATT
B2 ILL
B3 ACC
B4 GND

Speaker contacts

The rear panel identifies the four speaker outputs with a common-return configuration. Confirm the radio’s speaker wiring before use. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A4B1B4
Connector face in the reference orientation
Position Circuit shown on reference
A1 RR+
A4 LR+
B1 RF+
B4 LF+
Blaupunkt RDM RCM 126, 127, 128

ISO A · power and control

Power and speaker blocks shown in the model reference. Where marked KL15/30, check the unit-specific feed configuration. The upper accessory block varies by chassis and equipment.

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A1 Unlabelled in model drawing
A2 Mute input
A3 Unlabelled in model drawing
A4 Switched accessory +12 V
A5 Powered antenna or switched control
A6 Illumination input
A7 Permanent battery +12 V
A8 Ground

ISO B · speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B1 Right rear speaker +
B2 Right rear speaker −
B3 Right front speaker +
B4 Right front speaker −
B5 Left front speaker +
B6 Left front speaker −
B7 Left rear speaker +
B8 Left rear speaker −
Blaupunkt San Francisco SQR28

Main connector

The source uses the same LIN legend on multiple contacts and prints overlapping channel labels. The overlapping speaker positions remain unassigned. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.

A1A2A3B1B2B3C1C2C3D1D2D3E1E2E3F1F2F3
Connector face in the reference orientation
Position Circuit shown on reference
A1 CTRL
A2 LINE-LINE
A3 LINE-LINE
B1 LINE-LINE
B2 LINE-LINE
B3 LINE-GND
C1 ILL
C2 RF+
C3 LF−
E2 RR+
E3 LR−
F1 ACC
F2 BATT
F3 GND
Blaupunkt SC202

ISO A · power and control

The radio reference also shows a separate data connector.

A1A3A5A7A2A4A6A8
Radio socket viewed from the rear · block A
Cavity Circuit
A4 Switched +12 V
A5 Antenna control
A6 Illumination
A7 Permanent battery +12 V
A8 Ground

ISO B · speakers

B1B3B5B7B2B4B6B8
Radio socket viewed from the rear · block B
Cavity Circuit
B1 Right rear +
B2 Right rear −
B3 Right front +
B4 Right front −
B5 Left front +
B6 Left front −
B7 Left rear +
B8 Left rear −