Goldstar Aftermarket Radio Pinouts
Match the model and connector orientation to your radio. Verify the battery, accessory and ground circuits before applying power.
Goldstar TCC-1800
Main connector
Abbreviated channel labels are kept as printed. Source does not state polarity for the single-ended labels. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | NC |
| A2 | NC |
| A3 | NC |
| A4 | LINE-R |
| A5 | LINE-L |
| A6 | ACC |
| A7 | BATT |
| A8 | LF− |
| A9 | R- |
| A10 | LR |
| B1 | NC |
| B2 | NC |
| B3 | NC |
| B4 | LINE-R |
| B5 | LINE-L |
| B6 | ANT |
| B7 | GND |
| B8 | RF |
| B9 | R- |
| B10 | Right rear speaker |
Goldstar TCC-330
Main connector
Several contacts have the same source legend. The figure shows their positions as labelled. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A3 | RF+ |
| A4 | RR+ |
| A5 | LF+ |
| A6 | LR+ |
| A7 | RF− |
| A8 | LF− |
| A9 | BATT |
| B1 | R+ |
| B2 | GND |
| B3 | L+ |
| B4 | R+ |
| B5 | GND |
| B6 | L+ |
| B7 | LR− |
| B8 | RR− |
| B9 | GND |
Goldstar TCC-573
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT |
| A2 | RF+ |
| A3 | LF+ |
| A5 | RR+ |
| A6 | LR+ |
| A7 | BATT |
| B1 | ACC |
| B2 | RF− |
| B3 | LF− |
| B5 | RR− |
| B6 | LR− |
| B7 | GND |