Kenwood Aftermarket Radio Pinouts
Match the model and connector orientation to your radio. Verify the battery, accessory and ground circuits before applying power.
Current pinouts
Kenwood DMX8021DABS
22-way power and speaker header
The numbered connector drawing and main connector map agree. The antenna leads are identified separately at pins 19 and 20.
| Pin Num | Wire Color | Signal |
|---|---|---|
| 1 | G | RL+ | REAR DOOR SPEAKER L |
| 2 | G-B | RL- | REAR DOOR SPEAKER L |
| 3 | V-B | RR- | REAR DOOR SPEAKER R |
| 4 | V | RR+ | REAR DOOR SPEAKER R |
| 5 | V-W | REV | REVERSE LIGHT |
| 6 | LG | PRKSW | PARKING BRAKE |
| 7 | LB-Y | REMO | REMOTE CONTROL |
| 8 | NC | |
| 9 | BR | MUTE | MUTE CONTROL |
| 10 | O-W | ILL+ | DIMMER |
| 11 | Y | B+ | +12V Battery |
| 12 | W | FL+ | FRONT DOOR SPEAKER L |
| 13 | W-B | FL- | FRONT DOOR SPEAKER L |
| 14 | GR-B | FR- | FRONT DOOR SPEAKER R |
| 15 | GR | FR+ | FRONT DOOR SPEAKER R |
| 16 | G-W | CAM- | CAMERA CONTROL - |
| 17 | G-R | CAM+ | CAMERA CONTROL + |
| 18 | PK | S SENS | SPEED PULSE INPUT |
| 19 | L-W | ANT | ANT CONT Antenna Amplifier Supply (1) |
| 20 | L-W | ANT2 | ANT CONT Antenna Amplifier Supply (2) |
| 21 | R | ACC | +12V ACC Supply |
| 22 | B | GND | GROUND |
Kenwood Head Unit Auxilliary Input (CA-C1AUX)
13-way CD changer input
For the CA-C1AUX analogue input lead. The two RCA centres are separate channels with a shared return.
| Cavity | Circuit |
|---|---|
| 6 | Common audio return to RCA sleeves |
| 8 | Right audio input from RCA centre |
| 12 | Left audio input from RCA centre |
Kenwood KDC-7070R, KDC-5040R, KRC-958R, KRC-689, KRC-553
KDC-7070R connector face
The KDC-7070 diagram shows this layout. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | GND |
| A2 | ACC |
| A3 | ANT |
| A5 | RF+ |
| A6 | RF− |
| A7 | LF− |
| A8 | LF+ |
| B1 | BATT |
| B2 | ILL |
| B3 | MUTE |
| B4 | EXT |
| B5 | RR+ |
| B6 | RR− |
| B7 | LR− |
| B8 | LR+ |
KRC-553 connector face
The KRC-553 diagram shows a different layout. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | GND |
| A2 | BATT |
| A4 | ANT |
| A5 | RF+ |
| A6 | RF− |
| A7 | LF+ |
| A8 | LF− |
| B1 | ACC |
| B5 | RR+ |
| B6 | RR− |
| B7 | LR+ |
| B8 | LR− |
Kenwood KDC-84R, KDC-94R
Deck interface with line-level outputs
KCA-980 deck cradle. The stereo input and the front/rear assignment of the line outputs are unspecified in the numbered harness reference.
| Cavity | Circuit |
|---|---|
| 1 | Audio input A (left) |
| 2 | Input return for 1 and 11 |
| 7 | Left line output |
| 8 | Right line output |
| 9 | Right line output |
| 10 | Left line output |
| 11 | Audio input A (right) |
| 17 | Return for line output 7 |
| 18 | Return for line output 8 |
| 19 | Return for line output 9 |
| 20 | Return for line output 10 |
| 25 | Power ground |
| 26 | Switched +12 V |
| 27 | Amplifier control output |
| 33 | Permanent +12 V |
| 34 | Illumination |
Kenwood KRC-X70
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | BATT |
| A2 | ACC |
| A4 | RF+ |
| A5 | RF− |
| A6 | LF+ |
| A7 | LF− |
| B1 | GND |
| B3 | ANT |
| B4 | RR+ |
| B5 | RR− |
| B6 | LR+ |
| B7 | LR− |
Kenwood KRC-X727
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A2 | ANT |
| A3 | BATT |
| A4 | ACC |
| A5 | RR+ |
| A6 | RF+ |
| A7 | LF+ |
| A8 | LR+ |
| B4 | GND |
| B5 | RR− |
| B6 | RF− |
| B7 | LF− |
| B8 | LR− |
Kenwood KRC-X770
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A3 | BATT |
| A4 | ACC |
| A5 | LF+ |
| A6 | RF+ |
| A7 | LR+ |
| A8 | RR+ |
| B1 | ANT |
| B4 | GND |
| B5 | LF− |
| B6 | RF− |
| B7 | LR− |
| B8 | RR− |
Kenwood Mini-jack 3.5 to RCA adapter
3.5 mm A/V plug
CA-C3AV. From tip to cable, the order is left audio, right audio, common return, then video.
| Contact | Circuit |
|---|---|
| 1 | Left audio (tip) |
| 2 | Right audio (first ring) |
| 3 | Common return (second ring) |
| 4 | Composite video (sleeve) |
Legacy pinouts
CD changer old 13 pole connector
13-way CD changer port
Older Kenwood CD changer interface. Match the changer’s harness and connector before comparing with other 13-way interfaces.
| Pin Number | Pin Name | Description (may be empty) |
|---|---|---|
| 1 | CH-REQH | Request output to changer; Low : Request |
| 2 | GND | |
| 3 | Vcc | +12V |
| 4 | CH-CON | Changer control out; High : Operation mode Low : Standby |
| 5 | CH-MUTE | Mute request from changer; High : Mute |
| 6 | AGND | Audio Ground |
| 7 | CH-RST | Reset output to changer |
| 8 | R | Audio right channel |
| 9 | CH-REQC | Request input from changer; Active Low |
| 10 | CH-DATAC | Data input from changer |
| 11 | CH-DATAH | Data output to changer |
| 12 | L | Audio left channel |
| 13 | CH_CLK | Clock input/output for changer |
Kenwood FKR-GX33 (SUBARU)
Speaker socket
Photographed FKR-GX33 socket. The central lower position is a locator rather than a terminal. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | RF− |
| A2 | LF− |
| A4 | LR− |
| A5 | RR− |
| B1 | RF+ |
| B2 | LF+ |
| B4 | LR+ |
| B5 | RR+ |
Power socket
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | GND |
| A2 | ILL- |
| A3 | ANT |
| B1 | ACC |
| B2 | ILL+ |
| B4 | BATT |
Kenwood GX-505AF
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ACC |
| A2 | LR+ |
| A3 | RR+ |
| A5 | LF+ |
| A6 | RF+ |
| A7 | ILL |
| B1 | ANT |
| B2 | LR− |
| B3 | RR− |
| B4 | GND |
| B5 | BATT |
| B6 | LF− |
| B7 | RF− |
Kenwood KRC-1054R
Main connector
The source names input channels. Contact identities marked without a label are omitted. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT-GND |
| A2 | LINE-IN-FR |
| A3 | LINE-IN-RR |
| A9 | BATT |
| B1 | ANT |
| B3 | LINE-IN-FL |
| B4 | LINE-IN-RL |
| B8 | GND |
| C2 | LINE-IN-L |
| D2 | LINE-IN-R |
Kenwood KRC-265
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | GND |
| A2 | BATT |
| A3 | REM |
| A5 | RF+ |
| A6 | RF− |
| A7 | LF− |
| A8 | LF+ |
| B1 | ACC |
| B5 | RR+ |
| B6 | RR− |
| B7 | LR− |
| B8 | LR+ |
Kenwood KRC-28YA
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | GND |
| A2 | BATT |
| A3 | REM |
| A5 | RF+ |
| A6 | RF− |
| A7 | LF− |
| A8 | LF+ |
| B1 | ACC |
| B5 | RR+ |
| B6 | RR− |
| B7 | LR− |
| B8 | LR+ |
Kenwood KRC-3631
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | RF+ |
| A2 | RF− |
| A3 | RR+ |
| A4 | RR− |
| A5 | GND |
| A6 | ACC |
| A9 | ANT |
| B1 | LF+ |
| B2 | LF− |
| B3 | LR+ |
| B4 | LR− |
| B5 | BATT |
| B6 | ANT-POWER |
| B9 | ANT-GND |
Kenwood KRC-477R
ISO A · power and control
Power and speaker blocks shown in the model reference. Where marked KL15/30, check the unit-specific feed configuration. The upper accessory block varies by chassis and equipment.
| Cavity | Circuit |
|---|---|
| A1 | Unlabelled in model drawing |
| A2 | Unlabelled in model drawing |
| A3 | Unlabelled in model drawing |
| A4 | Permanent battery +12 V |
| A5 | Powered antenna or switched control |
| A6 | Illumination input |
| A7 | Switched accessory +12 V |
| A8 | Ground |
ISO B · speakers
| Cavity | Circuit |
|---|---|
| B1 | Right rear speaker + |
| B2 | Right rear speaker − |
| B3 | Right front speaker + |
| B4 | Right front speaker − |
| B5 | Left front speaker + |
| B6 | Left front speaker − |
| B7 | Left rear speaker + |
| B8 | Left rear speaker − |
Kenwood KRC-654RD
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ILL |
| A2 | ACC |
| A3 | BATT |
| A4 | LF+ |
| A5 | RF+ |
| A6 | LR+ |
| A7 | RR+ |
| B1 | ANT |
| B2 | NC |
| B3 | GND |
| B4 | LF− |
| B5 | RF− |
| B6 | LR− |
| B7 | RR− |
Kenwood KRC-951R, KRC-852D/L, KRC-752R, KRC-453D/L, KRC-452D/L
Main connector
Radio-specific cradle wiring; verify the exact model suffix. Contacts labelled PHONE have no individual signal directions in the source. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT-GND |
| A4 | LINE-OUT-L |
| A8 | ILL |
| A9 | BATT |
| A10 | LR− |
| A11 | LR+ |
| A12 | LF+ |
| A13 | LF− |
| B1 | ANT |
| B4 | LINE-OUT-R |
| B7 | ANT-CTRL |
| B8 | ACC |
| B9 | GND |
| B10 | RR− |
| B11 | RR+ |
| B12 | RF+ |
| B13 | RF− |
| C2 | IN-L |
| C10 | PHONE |
| D2 | IN-R |
| D10 | PHONE |
Kenwood KRC-951RDS, KRC-851D, KRC-751D/L, KRC-651D/L, KRC-451D/L
Main connector
The source marks ranges of amplifier contacts. Those individual accessory positions remain unconfirmed. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | ANT-GND |
| A8 | ILL |
| A9 | BATT |
| A10 | LR− |
| A11 | LR+ |
| A12 | LF+ |
| A13 | LF− |
| B1 | ANT |
| B8 | ACC |
| B9 | GND |
| B10 | RR− |
| B11 | RR+ |
| B12 | RF+ |
| B13 | RF− |