Prology Aftermarket Radio Pinouts
Match the model and connector orientation to your radio. Verify the battery, accessory and ground circuits before applying power.
Prology ADS-9825
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | LINE-RR |
| A2 | LINE-GND |
| A3 | ACC |
| A4 | LR− |
| A5 | LR+ |
| A6 | NC |
| A7 | RR− |
| A8 | RR+ |
| A9 | RF+ |
| A10 | RF− |
| B1 | LINE-LR |
| B2 | LINE-GND |
| B3 | LINE-RF |
| B4 | LINE-LF |
| B5 | GND |
| B6 | BATT |
| B7 | ANT |
| B8 | NC |
| B9 | LF− |
| B10 | LF+ |
Prology DVD-100B 928
JS4 power and audio connector
JS4 PW-14P-JK1. The drawing follows the numbered orientation printed in the electrical diagram.
| Cavity | Circuit |
|---|---|
| 1 | Antenna power |
| 2 | R-L (source label) |
| 3 | RL (source label) |
| 4 | R-R (source label) |
| 5 | Permanent battery +12 V |
| 6 | F-L (source label) |
| 7 | Switched accessory +12 V |
| 8 | CT (source label) |
| 9 | Ground |
| 10 | F-R (source label) |
| 11 | Amplifier control |
| 12 | Ground |
| 13 | Amplifier mute |
| 14 | Unlabelled |
Prology DVD-559
Main connector
Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A1 | GND |
| A2 | ILL |
| A3 | PARK |
| A4 | MUTE |
| A5 | LF− |
| A6 | LF+ |
| A7 | RF− |
| A8 | RF+ |
| B1 | BATT |
| B2 | ACC |
| B3 | ANT |
| B4 | REM |
| B5 | LR− |
| B6 | LR+ |
| B7 | RR− |
| B8 | RR+ |
Prology DVS-2135
ISO A · power and control
The DVS-2135 manufacturer installation diagram shows these keyed ISO A and B sockets and a 15 A fuse at the right. Some unattributed drawings depict different fittings. Use the chassis that matches this diagram.
| Cavity | Circuit |
|---|---|
| A4 | Permanent battery +12 V |
| A5 | Antenna or external amplifier turn-on |
| A7 | Switched accessory +12 V |
| A8 | Ground |
ISO B · speakers
| Cavity | Circuit |
|---|---|
| B1 | Right rear + |
| B2 | Right rear − |
| B3 | Right front + |
| B4 | Right front − |
| B5 | Left front + |
| B6 | Left front − |
| B7 | Left rear + |
| B8 | Left rear − |
Prology dvu AV
3.5 mm A/V plug
DVU1310 as listed by the source. From tip to cable, the order is left audio, right audio, common return, then video.
| Contact | Circuit |
|---|---|
| 1 | Left audio (tip) |
| 2 | Right audio (first ring) |
| 3 | Common return (second ring) |
| 4 | Composite video (sleeve) |
Prology ZX-9090 MP3
Main connector
The reference labels three power circuits and illustrates paired speaker contacts without channel or polarity designations. Position labels are added for this guide. Unlabelled circuits in the source have no assignment here.
| Position | Circuit shown on reference |
|---|---|
| A3 | ACC |
| A4 | SP |
| A5 | SP |
| A8 | SP |
| A9 | SP |
| A10 | SP |
| A11 | SP |
| B5 | GND |
| B7 | BATT |
| B10 | SP |
| B11 | SP |
Prology CMD-100R
These lead functions are from the CMD-100R installation manual. It specifies a 10 A fuse beneath the main wiring connector. The labelled CD-1581MP rear view does not establish the CMD-100R cavity positions. Match the original harness lead labels before wiring.
Original harness lead functions
- Yellow
- Permanent battery +12 V
- Red
- Switched ignition +12 V
- Black
- Chassis ground
- Blue
- Power antenna or external amplifier control
- White / white-black
- Front left + / −
- Grey / grey-black
- Front right + / −
- Green / green-black
- Rear left + / −
- Violet / violet-black
- Rear right + / −
- White / red RCA
- Left / right line-level output