Lexus LX570 J200 (2007–2015) — Harness C Connection Diagram

Use this connection reference to identify the plugs and leads in the Lexus LX570 J200 (2007–2015) Harness C package. It shows the supplied harness assembly, CANBUS decoder and labelled connection points.

For Harness C only

Match your supplied harness and factory connectors before following this diagram. This reference does not cover the A or B packages. The year range alone does not confirm which package your vehicle needs.

Original Harness C connection diagram

The complete original diagram is shown below. Open the full-size diagram to zoom in on the connector shapes and labels.

Original Lexus LX570 J200 2007–2015 Harness C connection diagram, including CANBUS decoder, head unit power and C-zone connections, frame connectors, audio and factory rear-view interfaces
Lexus LX570 J200 (2007–2015), package C — original supplier connection diagram, reproduced without altering the connectors or routing lines.

How to read the diagram

  1. Check the package first. Confirm that you have the C harness and compare the complete plug shapes with the supplied parts.
  2. Follow the blue guide lines. Each line links a photographed connector or lead to its label. The lines identify parts; they are not instructions to join bare wires.
  3. Check both ends of each connection. Distinguish the plugs that connect to the TEYES head unit from those that connect to the original vehicle wiring or replacement frame.
Connection group What the original diagram identifies
Head unit connections The main power-cord port and the connection labelled “host C zone” on the TEYES unit. Match these to the rear layout for your exact head unit.
CANBUS decoder The pictured decoder and the harness plugs linked to it. Use the decoder supplied for your package.
Original vehicle connectors Factory power, CD/protocol and airbag-interface labels. These are identification labels from the supplier; do not substitute another connector because it looks similar.
Frame connections The connectors labelled “Connection frame port”, associated with the replacement frame assembly.
Rear-view connections The rear-view lead and the labelled original-camera interfaces. The diagram does not specify a universal camera voltage or pin assignment.
Audio connections The RCA leads labelled “Audio Ports”. Identify each lead by its printed label as well as the diagram.

If your parts do not match

Stop and contact TEYES before changing wiring. Send your order number, selected package, photos of the complete supplied harness and decoder label, and clear photos of the factory connector faces and original radio label. Mention which TEYES model you are installing.

This image is a harness connection reference, rather than a pin-by-pin electrical diagram or a complete dashboard-removal procedure. For preparation, see the Head Unit Installation & Fitment Guide.

← Back to Installation Manuals · Contact TEYES Support